Auralis

Playing DSD files (DSF, DFF) on a Mac: DoP or PCM conversion?

macOS cannot play DSD natively. Two methods still let you enjoy your DSF and DFF files: send the DSD stream untouched to your DAC via DoP, or convert it to high-resolution PCM.

DSF, DFF, DSD64… what are they?

DSD is a 1-bit signal sampled at a very high rate: 2.8224 MHz for DSD64, twice that for DSD128, four times for DSD256. DSF (Sony) and DFF (Philips) files carry the same kind of signal; DSF also stores ID3 tags and artwork.

DoP: native DSD over a PCM link

DoP (DSD over PCM) packs 16 bits of DSD into each 24-bit PCM frame, marked with 0x05 and 0xFA bytes. DSD64 thus travels as a 176.4 kHz PCM stream that the DAC recognises and decodes as DSD.

Requirements: a DoP-capable DAC, and a stream that arrives strictly untouched (exclusive mode, no software volume, no EQ). A DAC that doesn't recognise DoP plays noise — always start at low volume.

PCM conversion: works with every DAC

Conversion filters the DSD signal into PCM, for example 176.4 kHz floating point. It's the universal option and lets you use EQ. It is no longer native DSD, and a good player should say so clearly.

Playing DSD with Auralis

Auralis plays DSF and DFF from DSD64 to DSD512. By default it converts to 176.4 kHz PCM (linear-phase FIR filter, SACD 0 dB = −6 dBFS to keep headroom). In DoP mode it checks that your DAC declares the carrier rate and that exclusive mode is on; otherwise it falls back to conversion and tells you in the signal path.

Download Auralis for freeMac (Apple Silicon & Intel, macOS 14+) · Windows 10/11

Related guides