Auralis

Using a USB DAC with a Mac: the right settings for the best sound

A USB DAC works on a Mac without a driver, but macOS defaults don't always send it the best signal. Here's how to get the most out of it.

Connecting and selecting the DAC

Most modern DACs are USB Audio Class 2 compliant: plug them in and they appear in System Settings › Sound. If your DAC tops out at 48 kHz, it is probably running in USB Audio Class 1 mode — check its manual (often a switch or firmware).

In your player, pick the DAC as a dedicated output: music keeps going there even if macOS switches elsewhere for a notification or a video call.

Sample rate, exclusive mode and volume

Sample rate: the DAC should follow each file's rate (44.1, 96, 192 kHz…). macOS doesn't do this by itself; an audiophile player does.

Exclusive mode: reserves the DAC for music, with no system-sound mixing.

Volume: prefer the DAC's (or amplifier's) hardware volume and keep software volume at 100%.

Headphones: correcting the response with AutoEQ

The AutoEQ project publishes measured corrections for thousands of headphones. Loaded into a parametric EQ, they bring your headphones closer to a reference curve. This processing changes the signal — a comfort choice worth comparing A/B.

Doing it in one click with Auralis

Auralis's Auto optimization assistant reads your DAC's capabilities (rates, bit depths, exclusive mode, hardware volume), compares them with your library and proposes the best settings, each one explained. It remembers a profile per DAC, re-applied when you plug it back in, and imports AutoEQ files directly. It never raises the volume automatically.

Download Auralis for freeMac (Apple Silicon & Intel, macOS 14+) · Windows 10/11

Related guides