Auralis

How Auralis verifies bit-perfect playback: the signal path in detail

“Bit-perfect” is often an unverifiable promise. Here is exactly what Auralis does between your file and your DAC, what it checks on every playback, what its automated tests prove — and the one limit we don't hide.

1. Decoding: exact samples

FLAC, ALAC and PCM are decoded by AudioToolbox to integers, then carried as Float32. Any integer up to 24 bits is represented exactly in Float32: nothing is lost. An automated test encodes synthetic FLAC files at 16/44.1, 24/96 and 24/192, decodes them and compares every sample: they are bit-identical.

32-bit integer sources don't fit in a 24-bit mantissa, so Auralis reports them as “CONVERSION” instead of pretending otherwise.

2. Real-time buffer: no hidden processing

Between decoder and output, samples go through a ring buffer written in C, with no allocation or lock on the audio thread. At 100% volume with DSP bypassed, rendering is a pure memory copy. Two tests check it: passing through the buffer (including wrap-around) is bit-exact, and the disabled DSP chain leaves the signal strictly untouched even when settings are loaded.

3. Core Audio output: configure, then read back

Before each track with a different format, Auralis sets your DAC's nominal sample rate to the file's (when the driver declares it) and waits for Core Audio to confirm. In exclusive mode it takes the device (Hog Mode) and sets a native integer physical format at least as deep as the source.

It then reads back the device's actual state: rate, physical format, exclusive owner. The indicator shows BIT-PERFECT only when everything matches, software volume is at 100% (or the DAC's hardware volume is used) and no processing is active. Otherwise: CONVERSION, with the exact cause (resampling, volume, EQ, ReplayGain, insufficient bit depth, Bluetooth…).

4. The limit, stated plainly

This check covers the configuration negotiated with macOS and the driver. No application can read what the DAC actually receives over USB, so Auralis never claims to have “measured” it.

The ultimate proof is a digital loopback test: route the output into a digital input (S/PDIF or AES on an audio interface, or a virtual device), record the stream and subtract it from the original file. A null difference means a bit-perfect chain. We will publish this test, with method and files, once it has been run on reference hardware.

5. DSD

With DoP, each frame carries 16 bits of DSD and a 0x05/0xFA marker: a test checks that DSD bytes and markers come out intact. DSP and software volume are then forced to have no effect. With PCM conversion, Auralis reports it as a conversion — because it is one.

Download Auralis for freeMac (Apple Silicon & Intel, macOS 14+) · Windows 10/11

Related guides